Car Model Jeep Wrangler 2012

Jeep Wrangler update for the 2012 model year, Jeep Wrangler 2012 now available to new petrol, economical and efficient 3.6-liter six-cylinder Pentastar V-shaped arrangement. The power unit combined with an efficient mechanical or automatic transmission offers excellent performance with modest fuel consumption. Pentastar


3.6L will be available in Europe for installation on the Jeep Wrangler and Jeep Wrangler Unlimited 2012 model year with the month of November.

Jeep Wrangler 2012 3.6L Pentastar
The new power plant is completely made of aluminum and with the volume of 3.6 liters to 40 pounds lighter 3.8-liter predecessor, who is also a V-6, but with a cast iron block. In addition, new motor 2012 Wrangler boasts a quiet work that at idle barely audible even in the immediate vicinity of the vehicle. This result was made possible by optimizing the design of the developer – the air conditioning compressor, alternator and power steering pump rigidly attached directly to the engine, eliminating vibration and excessive noise.

Jeep Wrangler 2012 2.8L CRD
Jeep offers for the 2012 model year, but an entirely new power plant capacity of 3.6 liters of V-shaped arrangement of the six cylinder, 2.8-liter turbocharged diesel engine, equipped with a control system Stop / Start, significantly reduces fuel consumption in heavy city traffic by turning off the engine during short stops at stoplights and in traffic jams.

The motor is completely off at the position of the gear lever in neutral and released the clutch pedal. Instant engine start while pressing the clutch pedal on the driver, is preparing to move another SUV to enable the transfer and disable the system by pressing the button next to the instrument panel, which displays the status of operation of technology Stop / Start.

The new Diesel Jeep Wrangler 2012 develops 200 horsepower, which is 13 percent more than the 2.8-liter predecessor, while torque is different depending on transmission. With 6-speed manual maximum torque of 410 Nm, and a 5-speed automatic increases to 460 Nm.

Automatic on Jeep Wrangler 2012
High-performance 5-speed automatic transmission allows the engine to operate in the most efficient rpm range, resulting in impressive fuel economy and 37 percent better acceleration-to-date Jeep Wrangler from 0 to 100 kilometers per hour, which is now going on for 8.1 seconds for the two-door models . In addition to the automatic transmission, the manufacturer proposed to amend the six-speed manual transmission that has been refined and optimized to work with a powerful new Pentastar 3.6L.

The manufacturer reports that for the first time in the Jeep engine is hidden under the protection which helps to reduce sound during operation, as well as using effective insulation that covers the interior of comfort and noise from the road.

Be ignored and the suspension of the new Jeep Wrangler 2012, which in the new model year brings more reliability, confidence and obstacles to the passage of a soft, quiet operation. Also, special attention was paid to the silence inside the car